The AirTAC Airtac SC32 Standard Cylinder SC32X350N is a genuine double-acting standard air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X350N is a double-acting single-rod pneumatic cylinder delivering 402 N of push force and 345 N of pull force at 0.5 MPa. With a 32 mm bore and a 12 mm diameter piston rod featuring an M10x1.25 thread, this model is a compact workhorse for medium-speed automation tasks.
This 350 mm stroke unit is built with NBR (nitrile) seals, making it suitable for general industrial environments within the standard -20 to +70 °C temperature range. The tie-rod construction includes an adjustable air cushion of 21 mm at each end, effectively decelerating the piston to reduce impact noise and vibration. The body length A is 140 mm, giving a total extended length of 490 mm.
| Model | Airtac SC32 Standard Cylinder SC32X350N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the precise 350 mm reach needed for diverting lightweight packages or components on conveyor lines, with the 402 N force sufficient for quick, repetitive actuation.
Ideal for jigs and fixtures where a compact 32 mm bore fits tight spaces. The NBR seals offer reliable performance for clamping small electronic or mechanical parts during assembly.
Used in case packers or label applicators, the 350 mm stroke pushes products into position. The adjustable cushion ensures smooth, quiet operation in high-cycle packaging environments.
For applications requiring higher force, consider stepping up to the SC40 series, which provides 628 N of push force at 0.5 MPa. For lighter, more compact needs, the 32 mm bore is ideal. This 350 mm stroke length is well-supported, but always ensure the rod is guided externally if significant side loads are present, as the 12 mm rod can be susceptible to bending under off-axis forces.
To guarantee a direct physical and functional replacement, match these five points: 32 mm bore, 350 mm stroke, PT (1/8) port thread, NBR seal material, and the basic mounting configuration. This cylinder is not dimensionally interchangeable with ISO 15552 profiles; it is a shorter tie-rod design specific to the AirTAC SC family.
Quick checklist
At the standard 0.5 MPa operating pressure, the cylinder generates 402 N extending (push) and 345 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is a direct replacement only for another AirTAC SC32 cylinder with matching bore, stroke, NBR seals, and PT ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.