The AirTAC Airtac SC32 Standard Cylinder SC32X350STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X350STC is a double-acting single-rod pneumatic cylinder delivering 402 N push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter rod and 21 mm adjustable air cushion provide smooth end-of-stroke deceleration for light to medium automation tasks.
This model features a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and a centre trunnion mount (TC) supplied with the TCM1 bracket (F-SC32TC), allowing the cylinder to pivot freely under swinging loads. The 350 mm stroke, combined with a compact body length A of 140 mm, suits space-constrained linear transfer applications.
| Model | Airtac SC32 Standard Cylinder SC32X350STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 350 mm stroke and centre trunnion pivot let the cylinder actuate a diverter gate on a conveyor, with the built-in magnet providing end-of-stroke confirmation via reed sensors.
Lightweight end-of-arm tooling benefits from the 402 N push force and adjustable cushion, while the trunnion mount absorbs the swinging motion of the arm.
The 32 mm bore delivers controlled clamping force for electronic component testing, and the magnetic piston allows sensor feedback to confirm clamp engagement.
Choose the SC32 bore for push forces up to 724 N at 0.9 MPa; step up to the SC40 (628 N at 0.5 MPa) if your load requires a larger 16 mm rod and higher force margin. For this 350 mm stroke, ensure side loads are minimal or use an external guide rail—the 12 mm rod can deflect under bending stress if the load is not axially aligned.
When replacing an existing cylinder, match five points: 32 mm bore, 350 mm stroke, PT1/8 port thread, centre trunnion mounting (F-SC32TC), and the built-in magnet for sensor compatibility. The SC is a tie-rod design, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC tie-rod cylinders.
Quick checklist
At 0.5 MPa it produces 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, pushing force rises to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet, so CMSG, DMSG, or EMSG reed and solid-state sensors can be clamped directly onto the barrel to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.