The AirTAC Airtac SC32 Standard Cylinder SC32X35S is a genuine double-acting standard air cylinder with a Ø32mm bore and 35mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X35S is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 35 mm stroke suits short clamping, ejecting, and sorting tasks where a compact footprint is essential. The 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable end-of-stroke deceleration in a body just 140 mm long.
This model carries the -S suffix, meaning a built-in magnet is integrated into the piston. This allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing, simplifying automation integration without external brackets.
| Model | Airtac SC32 Standard Cylinder SC32X35S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for compact fixtures on CNC routers or 3D printers, holding workpieces securely during light machining.
Use the 35 mm stroke to actuate small diverter flaps on mini-conveyors. The built-in magnet enables easy end-of-stroke confirmation with a DMSG sensor.
Compact and clean, the SC32X35S fits test-tube sorting and microplate handling. Sensor feedback from the -S magnet ensures precise, repeatable motion in automated workflows.
Choose the SC32 bore for light-duty applications needing up to 402 N at 0.5 MPa. If your force requirement is higher, step up to the SC40 bore which provides 628 N at the same pressure. For replacement, match five points exactly: 32 mm bore, 35 mm stroke, PT1/8 port thread, the built-in magnet (-S), and your required mounting accessory (this unit is basic, but LB, FA, FB, CA, CB, or TC mounts can be ordered).
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without any additional mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.