The AirTAC Airtac SC32 Standard Cylinder SC32X36 is a genuine double-acting standard air cylinder with a Ø32mm bore and 36mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X36 is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for light clamping, sorting, and ejector tasks where a short, controlled stroke is needed.
This 32 mm bore tie-rod cylinder uses PT1/8 ports and an M10x1.25 rod thread. With a body length A of 140 mm, the total extended length is approximately 176 mm. The standard TPU seals provide reliable operation from -20 to +70 °C with filtered air.
| Model | Airtac SC32 Standard Cylinder SC32X36 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 36 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×36 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 36 mm stroke and 402 N push force reliably eject lightweight plastic or metal components from injection molds or stamping dies.
Actuates small diverter flaps on mini conveyors. The 21 mm cushion absorbs end-of-stroke impact for smooth, quiet operation.
Applies consistent holding pressure for gluing or assembly jigs. The 12 mm rod resists bending under direct axial loads.
For applications needing slightly more force, stepping up to the 40 mm bore (628 N push at 0.5 MPa) is a direct option. The SC32X36 is a basic configuration without a magnet or mounting bracket—order the -S suffix for a built-in magnet to use CMSG/DMSG sensors, or add an LB foot mount (F-SC32LB) for surface fixing. When replacing, match bore, stroke, PT port thread, and mounting style to ensure drop-in compatibility with another AirTAC SC tie-rod cylinder.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
This SC32X36 model does not include a magnet. To use CMSG, DMSG, or EMSG sensors, order the SC32X36-S variant, which has a built-in magnet band on the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.