The AirTAC Airtac SC32 Standard Cylinder SC32X360S is a genuine double-acting standard air cylinder with a Ø32mm bore and 360mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X360S is a double-acting pneumatic cylinder with a 32 mm bore and 360 mm stroke, delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). Its compact tie-rod design features a 12 mm diameter piston rod and PT1/8 ports, making it suitable for light automation tasks where space is limited.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for reliable end-of-stroke detection. The 21 mm air cushion at each end is adjustable, helping to decelerate the piston smoothly and reduce impact noise in high-cycle applications.
| Model | Airtac SC32 Standard Cylinder SC32X360S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Ideal for actuating gates or diverters on conveyor lines handling lightweight components, where the 402 N push force easily shifts small packages.
Used in diagnostic equipment for precise, repeatable linear movement of sample trays or pipetting mechanisms, benefiting from the clean, sensor-ready design.
Provides a consistent clamping force for sealing jaws on small blister packs or cartoners, with magnetic sensors confirming jaw position before cycle start.
Choose the SC32 bore when your application needs up to 402 N of force at standard plant air pressure. If you require more force, consider stepping up to the SC40 bore, which provides 628 N push at 0.5 MPa. For this 360 mm stroke, ensure the load is guided if there is any side force; the 12 mm rod is slender and can bend under lateral loads. When replacing an existing cylinder, match five points: 32 mm bore, 360 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
At 0.5 MPa (5 bar) the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix indicates a built-in magnet. You can attach AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly to the tie-rod barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.