The AirTAC Airtac SC32 Standard Cylinder SC32X365 is a genuine double-acting standard air cylinder with a Ø32mm bore and 365mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X365 is a compact double-acting pneumatic cylinder built on the AirTAC SC tie-rod platform, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 365 mm stroke suits medium-reach linear tasks, with a 12 mm diameter piston rod providing adequate column strength for inline loads. The adjustable air cushion (21 mm length) helps decelerate the piston quietly at both ends of the stroke.
With a body length A of 140 mm, the total extended length of the SC32X365 reaches approximately 505 mm. The cylinder uses a PT1/8 port and an M10x1.25 rod thread for standard knuckle attachment. This model is supplied with TPU seals, rated for an operating temperature range of -20 to +70 °C, and filtered air to 40 µm.
| Model | Airtac SC32 Standard Cylinder SC32X365 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 365 mm stroke and 402 N push force at 0.5 MPa make the SC32X365 ideal for diverting or sorting small packages on conveyor lines, where a fast, light actuator is needed.
Apply consistent clamping pressure in woodworking or light assembly jigs. The adjustable cushion protects the fixture from impact, and the 12 mm rod is easy to tool.
Use the SC32X365 to actuate linear slides in laboratory test setups. The double-acting control allows precise, repeatable positioning over the 365 mm working range.
Choose the SC32X365 when your application needs a light, fast actuator with a stroke just over 350 mm. If the 402 N push force at 0.5 MPa is marginal, stepping up to the 40 mm bore (SC40 series) provides 628 N at the same pressure. For strokes of 300 mm or more, always evaluate side-loading: the 12 mm rod can bend under off-axis forces. Use an external linear guide or switch to a guided cylinder if the load is not perfectly aligned with the rod axis.
To replace an existing cylinder, match five points exactly: 32 mm bore, 365 mm stroke, PT1/8 port thread, basic (no bracket) mounting, and no magnet. The SC32 is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC32 tie-rod cylinder matching the bore, stroke, port thread, and mounting style.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.