The AirTAC Airtac SC32 Standard Cylinder SC32X375S is a genuine double-acting standard air cylinder with a Ø32mm bore and 375mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X375S is a double-acting single-rod pneumatic cylinder from the AirTAC SC tie-rod family, combining a 32 mm bore with a 375 mm stroke. It produces a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, making it a capable actuator for light to medium automation tasks.
This model includes a factory-installed magnet (suffix -S), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for non-contact position sensing. The 12 mm diameter rod features an M10x1.25 knuckle thread, and the cylinder body has a compact length of 140 mm (A dimension), resulting in a total extended length of approximately 515 mm.
| Model | Airtac SC32 Standard Cylinder SC32X375S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet enables precise end-of-stroke detection with CMSG/DMSG sensors, making this cylinder ideal for diverting or sorting small packages on conveyor lines where position confirmation is critical.
Delivers 402 N of push force at standard shop air, suitable for pressing bushings, inserting pins, or clamping small components in semi-automated assembly cells with electronic cycle counting.
The compact 140 mm body length and clean double-acting operation suit repetitive sampling mechanisms in medical or food-grade lab equipment, where the magnet confirms each cycle completion.
Choose the SC32X375S when your application requires a 32 mm bore with sensor feedback. If higher force is needed, stepping up to the SC40 series provides 628 N of push force at 0.5 MPa. For strokes of 300 mm or more, ensure the rod is not subjected to significant side loads; a 12 mm rod extended 375 mm is vulnerable to bending. Use an external linear guide or switch to a guided cylinder if lateral forces are present.
For direct replacement, match five key specifications: 32 mm bore, 375 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting configuration. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than an ISO 15552 profile cylinder. The mounting dimensions and body length differ, so it is not a drop-in replacement. Only use it to replace another AirTAC SC32 tie-rod cylinder with matching bore, stroke, port, and magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.