The AirTAC Airtac SC32 Standard Cylinder SC32X40STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 40mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X40STC is a double-acting single-rod pneumatic cylinder delivering a push force of 402 N at 0.5 MPa (724 N at 0.9 MPa). Its compact 32 mm bore and 40 mm stroke suit short linear actuation tasks, with a 12 mm diameter piston rod and a body length A of 140 mm.
This model is factory-equipped with a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, and a centre trunnion mount (TC suffix) supplied with the TCM1 bracket for pivoting applications. The standard PT port thread and TPU seals provide reliable operation from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X40STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 40 mm stroke and 402 N push force at 0.5 MPa efficiently actuate diverter gates for lightweight packages on conveyor lines.
With the built-in magnet, CMSG/DMSG sensors provide end-of-stroke confirmation for precise clamping of small electronic components during assembly.
The centre trunnion mount (F-SC32TC) allows the cylinder to pivot freely, ideal for driving short-throw levers and linkages in packaging machinery.
Choose the SC32 bore for light-duty pneumatic tasks needing up to 402 N at 0.5 MPa. If your force requirement exceeds 600 N, step up to the SC40 bore (628 N at 0.5 MPa). For a drop-in replacement, match five key points: 32 mm bore, 40 mm stroke, PT port thread, centre trunnion (TC) mounting, and the built-in magnet (-S) for sensor compatibility. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix indicates a built-in magnet, allowing CMSG/DMSG/EMSG sensors to clamp directly onto the barrel for non-contact position sensing without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.