The AirTAC Airtac SC32 Standard Cylinder SC32X410 is a genuine double-acting standard air cylinder with a Ø32mm bore and 410mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X410 is a compact double-acting tie-rod cylinder delivering a push force of 402 N at 0.5 MPa and up to 724 N at the 0.9 MPa maximum operating pressure. With a 12 mm piston rod and a 410 mm stroke, it suits medium-reach actuation tasks where space is limited but reliable linear force is required.
This model features a 140 mm body length (dimension A) and an adjustable pneumatic cushion of 21 mm at each end to decelerate the piston smoothly. The standard PT1/8 ports and M10x1.25 rod thread make it straightforward to plumb and connect. As a genuine AirTAC SC series cylinder, it is built for filtered-air service at pressures from 0.15 to 1.0 MPa.
| Model | Airtac SC32 Standard Cylinder SC32X410 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 410 mm stroke and 402 N push force at 0.5 MPa reliably actuate diverter gates on compact packaging conveyors, sorting lightweight cartons or parcels with smooth, adjustable end-of-stroke cushioning.
Delivers up to 724 N at 0.9 MPa for pressing bushings, pins, or connectors into light assemblies. The tie-rod construction allows easy mounting of tooling plates on the front flange.
Extends a labeling head 410 mm to apply tags on variable-height packages. The adjustable cushion protects the label applicator from impact damage during high-cycle operation.
Choose the SC32X410 when your application needs roughly 400 N of push force at standard plant pressure. If you require more force, stepping up to the SC40 bore provides 628 N at 0.5 MPa, a 56% increase. For lighter, faster cycles, the SC32 remains the lighter-weight choice. At a 410 mm stroke on a 12 mm rod, be mindful of side loads—long, unsupported rods can bend under off-axis forces. If the load is not guided externally, consider adding an external linear guide or switching to a guided cylinder to protect the rod bearing and seal.
For drop-in replacement, match five points: 32 mm bore, 410 mm stroke, PT port thread, the basic (no bracket) mounting configuration, and the absence of a magnet. This ensures dimensional and performance interchangeability with another AirTAC SC32 tie-rod cylinder.
Quick checklist
At 0.7 MPa operating pressure, the SC32 bore generates a theoretical push force of 563 N. The pull force on the retract stroke is lower due to the 12 mm rod area, producing 345 N at 0.5 MPa. Always factor in a safety margin for friction and dynamic loads.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder. The mounting dimensions, body length (140 mm + stroke), and port locations differ, so an ISO 15552 cylinder is not a drop-in replacement. You must match another AirTAC SC32 tie-rod cylinder with the same bore, stroke, and port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.