The AirTAC Airtac SC32 Standard Cylinder SC32X410S is a genuine double-acting standard air cylinder with a Ø32mm bore and 410mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X410S is a 32 mm bore double-acting tie-rod cylinder with a 410 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-stroke applications.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for precise end-of-stroke or mid-position detection. The total extended body length is approximately 550 mm, making it a compact choice where ISO 15552 cylinders are too long.
| Model | Airtac SC32 Standard Cylinder SC32X410S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 410 mm stroke and built-in magnet sensors enable precise, multi-position diverting of small packages or components on conveyor lines.
Provides 402 N of push force for pressing, clamping, or inserting components in compact assembly cells, with sensor feedback for cycle confirmation.
The clean, double-acting operation and adjustable cushion make it suitable for sample handling or test fixtures requiring a repeatable 410 mm linear motion.
Choose the SC32X410S when your application requires around 402 N of force at standard plant pressure. If you need more force, step up to the 40 mm bore SC40 series, which provides 628 N at 0.5 MPa. For lighter, more compact needs, the 32 mm bore is the smallest standard SC tie-rod option.
For a 410 mm stroke, ensure the load is guided externally or the rod is not subjected to significant side loading, as the 12 mm rod can bend under lateral forces. For a direct replacement, match the 32 mm bore, 410 mm stroke, PT1/8 port thread, basic mounting, and the -S magnet option.
Quick checklist
At 0.5 MPa operating pressure, this cylinder provides 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston. You can directly clamp compatible AirTAC CMSG, DMSG, or EMSG sensors onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.