The AirTAC Airtac SC32 Standard Cylinder SC32X430SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 430mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X430SLB is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 32 mm bore with a 430 mm stroke. At 0.5 MPa it generates 402 N extending force and 345 N retracting force, while the maximum operating thrust at 0.9 MPa reaches 724 N, driven by a 12 mm diameter piston rod.
This configuration includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and an LB foot mount (F-SC32LB) for secure axial surface installation. The adjustable air cushion (21 mm length) decelerates the piston smoothly at stroke ends, and the PT1/8 port thread ensures straightforward pneumatic connection.
| Model | Airtac SC32 Standard Cylinder SC32X430SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 430 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×430 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 430 mm stroke and 402 N push force at 0.5 MPa reliably actuates diverter gates on compact conveyor lines, routing lightweight packages or components without excess force.
With a built-in magnet for end-of-stroke sensing, this cylinder confirms clamp position in automated machining or assembly jigs, ensuring consistent part holding during light drilling or bonding.
Delivers precise 430 mm linear motion to push products into labeling stations. The LB foot mount provides stable, fixed-axis alignment for repeatable positioning.
Choose the SC32 bore for light clamping, sorting, and small-part transfer tasks where the 402 N push force at 0.5 MPa is sufficient. If your application requires higher force, step up to the SC40 bore which provides 628 N at the same pressure. For this 430 mm stroke, ensure the rod is not subjected to side loading; an external linear guide is recommended to prevent rod bending and premature bearing wear.
When replacing an existing cylinder, match five key points: 32 mm bore, 430 mm stroke, PT1/8 port thread, LB foot mounting (F-SC32LB), and the built-in magnet (-S) for sensor compatibility. This ensures a drop-in fit within the AirTAC SC tie-rod family.
Quick checklist
At the standard operating pressure of 0.5 MPa, the extending force is 402 N and the retracting force is 345 N. At the maximum operating pressure of 0.9 MPa, the extending force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet inside the piston, allowing you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.