The AirTAC Airtac SC32 Standard Cylinder SC32X465S is a genuine double-acting standard air cylinder with a Ø32mm bore and 465mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X465S is a double-acting AirTAC SC tie-rod cylinder with a 32 mm bore and a 465 mm stroke, equipped with a built-in magnet for barrel-mounted sensors. It generates a push force of 402 N at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, making it a compact workhorse for light automation tasks.
This model uses a 12 mm diameter piston rod with an M10x1.25 knuckle thread and PT1/8 ports. The total extended body length is approximately 605 mm (140 mm body length A plus 465 mm stroke). The adjustable pneumatic cushion at each end is 21 mm long, effectively decelerating the piston near stroke end to reduce impact noise.
| Model | Airtac SC32 Standard Cylinder SC32X465S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 465 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×465 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 465 mm stroke and built-in magnet for sensor feedback make this cylinder ideal for diverting lightweight packages on conveyor lines, providing reliable position confirmation at each end.
Delivers smooth, controlled linear motion for adhesive applicators. The adjustable air cushion prevents vibration at stroke end, ensuring a clean, precise bead placement.
A clean pneumatic solution for moving sample trays or slides in test equipment. The 724 N max force at 0.9 MPa offers ample power for pushing and pulling light mechanical assemblies.
Choose the SC32 when your application requires up to 402 N of force at standard plant pressure. If you need more thrust, step up to the SC40 bore, which provides 628 N at the same 0.5 MPa. For this 465 mm stroke, ensure the load is axially aligned; long strokes with a 12 mm rod can be susceptible to bending under side loads. An external guide or linear rail is recommended if any radial force is present.
To replace an existing cylinder, match five key points: 32 mm bore, 465 mm stroke, PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic tie-rod mounting footprint. The -S suffix indicates the integrated magnet, allowing CMSG or DMSG sensors to clamp directly onto the barrel for end-of-stroke detection.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force on the retract stroke is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix in the model code SC32X465S designates a built-in magnetic piston ring. This allows you to clamp AirTAC CMSG (reed) or DMSG (solid-state) sensors directly onto the barrel's tie-rod slots to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.