The AirTAC Airtac SC32 Standard Cylinder SC32X470 is a genuine double-acting standard air cylinder with a Ø32mm bore and 470mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X470 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 32 mm bore and 470 mm stroke, this model is well-suited for medium-reach clamping, sorting, and light transfer tasks where a compact body length is required.
This cylinder uses a 12 mm piston rod with M10x1.25 threads and features an adjustable air cushion (21 mm length) to decelerate the load smoothly. The body length A is 140 mm, and the total extended length reaches approximately 610 mm. PT1/8 ports provide standard pneumatic connections.
| Model | Airtac SC32 Standard Cylinder SC32X470 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves small components between conveyor lanes or indexing stations with a 470 mm reach, using the 402 N push force at standard line pressure.
Applies consistent holding pressure for gluing or assembly jigs, benefiting from the smooth deceleration of the 21 mm adjustable air cushion.
Operates diverter gates on packaging lines, where the 32 mm bore provides enough thrust to redirect small cartons reliably.
For applications needing more force, stepping up to the 40 mm bore (SC40 series) provides 628 N at 0.5 MPa. When replacing an existing unit, match five points: bore (32 mm), stroke (470 mm), PT port thread, basic mounting (no brackets), and the absence of a magnet. At 470 mm, the rod is fully supported within the standard stroke range for this bore (max 1000 mm). Ensure the load is guided externally if side forces are present, as the 12 mm rod is designed for axial loads.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N; at 0.7 MPa it delivers 563 N, and at the maximum operating pressure of 0.9 MPa it reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It replaces another AirTAC SC32 tie-rod cylinder with the same bore, stroke, and port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.