The AirTAC Airtac SC32 Standard Cylinder SC32X470S is a genuine double-acting standard air cylinder with a Ø32mm bore and 470mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X470S is a double-acting tie-rod cylinder with a 32 mm bore and 470 mm stroke, delivering a push force of 402 N at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm piston rod and PT1/8 ports suit compact pneumatic circuits needing moderate force over a mid-range stroke.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The standard TPU seals provide reliable operation from -20 to +70 °C, and the adjustable air cushion at each end decelerates the piston smoothly within the 21 mm cushion zone.
| Model | Airtac SC32 Standard Cylinder SC32X470S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 470 mm stroke and sensor-ready magnet make this cylinder ideal for diverting or sorting small packages on conveyor lines, with end-of-stroke confirmation via DMSG sensors.
Delivers 402 N at 0.5 MPa for pressing bushings or aligning components in light assembly fixtures, where mid-range reach and position feedback are required.
The compact 32 mm bore and clean double-acting motion suit automated sampling or test equipment, with the magnet enabling precise stroke-end detection.
Choose the SC32 bore for light push/pull tasks up to 724 N at 0.9 MPa. If your application needs more force, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For strokes of 300 mm or more, like this 470 mm unit, be mindful of side loading—long unsupported rods can bend under lateral force. Use an external guide or a guided cylinder to protect the rod bearing.
To replace an existing SC32 cylinder, match five points: bore (32 mm), stroke (470 mm), port thread (PT), mounting accessory (basic, no bracket), and the magnet option (-S). The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet, so you can clamp AirTAC CMSG, DMSG, or EMSG reed/solid-state sensors directly onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.