The AirTAC Airtac SC32 Standard Cylinder SC32X475 is a genuine double-acting standard air cylinder with a Ø32mm bore and 475mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X475 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa, making it ideal for light-duty clamping and sorting tasks. Its 12 mm piston rod and 21 mm adjustable air cushion provide smooth deceleration, while the 140 mm body length keeps the footprint small.
With a 475 mm stroke, this model handles medium-reach applications without exceeding the 1000 mm maximum standard stroke for the 32 mm bore. The PT1/8 ports and M10x1.25 rod thread ensure straightforward pneumatic connections, and the TPU seals offer reliable operation from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X475 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is well-suited for clamping and holding small components during light machining or assembly operations.
With a 475 mm stroke, this cylinder can actuate diverter gates on compact conveyor lines, reliably directing items without excessive force.
The clean, double-acting operation and adjustable cushion make it a good fit for precise linear movements in test and measurement equipment.
Choose the SC32 when your application needs up to 402 N at 0.5 MPa. If you require more force, step up to the SC40 bore, which provides 628 N at the same pressure. For strokes of 300 mm or more, ensure the rod is not subjected to side loads; use an external guide or a guided cylinder to prevent rod bending and premature seal wear.
When replacing an existing cylinder, match five key points: 32 mm bore, 475 mm stroke, PT1/8 port thread, basic (no bracket) mounting, and the absence of a built-in magnet. This ensures a direct drop-in fit for another AirTAC SC32 tie-rod unit.
Quick checklist
At 0.5 MPa the push force is 402 N, and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 804 N (82 kgf).
No, the SC32X475 is a double-acting cylinder and will not hold its position if pressure is lost or the valve is centered. For load-holding, you must add a pilot-operated check valve or an external mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.