Airtac SC32 Standard Cylinder SC32X475S
The AirTAC Airtac SC32 Standard Cylinder SC32X475S is a genuine double-acting standard air cylinder with a Ø32mm bore and 475mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke475 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X475S
The SC32X475S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for moderate-speed automation tasks requiring end-of-stroke deceleration.
This model includes a built-in magnet (suffix -S), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly onto the tie-rod barrel for non-contact position sensing. With a body length A of 140 mm, the total extended length is approximately 615 mm.
Airtac SC32 Standard Cylinder SC32X475S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X475S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X475S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X475S Is Used
Sensor-Monitored Sorting Gates
The built-in magnet and 475 mm stroke suit diverting gates on conveyors where end-of-stroke confirmation via CMSG/DMSG sensors is required for sequencing.
Light-Duty Part Transfer
With 402 N of push force at 0.5 MPa, this cylinder handles pick-and-place of small components between fixtures on assembly lines.
Packaging Pusher Mechanisms
The 21 mm adjustable cushion decelerates the 12 mm rod smoothly, making it suitable for pushing lightweight cartons or trays into wrapping stations.
Is the Airtac SC32 Standard Cylinder SC32X475S the Right Cylinder?
Choose the SC32X475S when your application needs a compact 32 mm bore with sensor-ready position feedback. If your force requirement exceeds 724 N at 0.9 MPa, step up to the SC40 series, which provides 628 N of push at 0.5 MPa. For strokes of 300 mm or more, evaluate side-load conditions carefully—the 12 mm rod can bend under lateral force; use an external linear guide or a guided cylinder if side loads are present.
For a direct replacement, match these five points: 32 mm bore, 475 mm stroke, PT1/8 port thread, basic mounting (no bracket), and the -S magnet option for sensor compatibility. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X475S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG, DMSG, or EMSG sensors can be clamped directly onto the barrel for reliable position detection without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X475S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.