The AirTAC Airtac SC32 Standard Cylinder SC32X480S is a genuine double-acting standard air cylinder with a Ø32mm bore and 480mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X480S is a double-acting pneumatic cylinder with a 32 mm bore and 480 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the maximum operating pressure of 0.9 MPa). The 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-speed automation tasks.
This model includes the -S suffix for a built-in magnet, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for non-contact position sensing. The body length A is 140 mm, resulting in a total extended length of approximately 620 mm, making it a compact choice for space-constrained pick-and-place or sorting systems.
| Model | Airtac SC32 Standard Cylinder SC32X480S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 480 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×480 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 480 mm stroke and integrated magnet for sensor feedback make this cylinder ideal for diverting small packages or components on conveyor lines where position confirmation is required.
Delivers consistent 402 N clamping force at standard shop air pressure, suitable for holding small assemblies or electronic devices during automated functional testing.
The compact body and 480 mm reach suit vertical or horizontal pick-and-place gantries handling lightweight parts, with sensor feedback ensuring end-of-stroke detection.
Choose the SC32 bore for light-duty actuation up to 724 N. If your application requires more force, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For strokes of 300 mm or longer, like this 480 mm unit, evaluate side-load conditions carefully—long, unsupported 12 mm rods can bend under lateral force. Use an external linear guide or a guided cylinder if side loads are present. For a direct replacement, match the 32 mm bore, 480 mm stroke, PT1/8 port thread, basic mounting, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
At 0.7 MPa operating pressure, the 32 mm bore generates a theoretical push force of 563 N. The pull force on the retract stroke is lower due to the 12 mm rod area, producing 345 N at 0.5 MPa.
Yes. The -S suffix in SC32X480S indicates a built-in magnet in the piston. This allows you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel for precise, non-contact position sensing without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.