Airtac SC32 Standard Cylinder SC32X500
The AirTAC Airtac SC32 Standard Cylinder SC32X500 is a genuine double-acting standard air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X500
The SC32X500 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With a 500 mm stroke, it reaches the maximum standard stroke for the 32 mm bore, making it ideal for applications needing full extension in a limited envelope.
This model features a 12 mm diameter piston rod with M10x1.25 threads and a 21 mm adjustable air cushion at each end to decelerate the load smoothly. The body length A is 140 mm, and the total extended length is approximately 640 mm. It uses PT1/8 ports and operates on filtered air from -20 to +70 °C with its standard TPU seals.
Airtac SC32 Standard Cylinder SC32X500 Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X500 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X500
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X500 Is Used
Small Part Sorting
Extends to 500 mm to divert lightweight components on compact conveyor lines, operating reliably at standard shop air pressures.
Tensioning Mechanism
Applies consistent 402 N pull force at 0.5 MPa to maintain tension on belts or chains in packaging and textile machinery.
Laboratory Actuation
Provides clean, oil-free linear motion for test fixtures and lab automation equipment where a 500 mm reach is essential.
Is the Airtac SC32 Standard Cylinder SC32X500 the Right Cylinder?
Choose the SC32X500 when your application requires a 500 mm stroke within the 32 mm bore class. If you need more force, step up to the SC40 series, which provides 628 N of push force at 0.5 MPa. For strokes longer than 500 mm, a non-standard order is required for this bore size. When replacing an existing cylinder, match these five points exactly: 32 mm bore, 500 mm stroke, PT1/8 port thread, basic mounting (no accessories), and the absence of a magnetic piston. For this 500 mm stroke, ensure the rod is not subjected to side loads; use an external linear guide if lateral forces are present to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X500 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It can only directly replace another AirTAC SC32 tie-rod cylinder with matching stroke, port thread, and mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.