Airtac SC32 Standard Cylinder SC32X500TC
The AirTAC Airtac SC32 Standard Cylinder SC32X500TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X500TC
The SC32X500TC is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm air cushion provide smooth deceleration, making it a reliable workhorse for light automation tasks.
This model is factory-configured with a TC centre trunnion mount (supplied with TCM1 bracket, order code F-SC32TC), allowing the cylinder to pivot freely under swinging loads. The 500 mm stroke reaches the maximum standard length for the 32 mm bore, giving designers full travel in a space-efficient envelope with a body length of just 140 mm.
Airtac SC32 Standard Cylinder SC32X500TC Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X500TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X500TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X500TC Is Used
Small Part Sorting Gates
The 500 mm stroke and pivoting trunnion mount suit diverting gates on compact conveyors, where the cylinder swings to direct lightweight packages or components.
Clamping & Fixturing
With 724 N of force at 0.9 MPa, this cylinder provides consistent clamping pressure for light machining or assembly fixtures, especially where the tooling needs to pivot into position.
Test Rig Actuation
Ideal for laboratory test stands requiring a 500 mm linear stroke with smooth cushioning. The centre trunnion allows the cylinder body to self-align during cyclic testing.
Is the Airtac SC32 Standard Cylinder SC32X500TC the Right Cylinder?
Choose the SC32 bore when your application needs up to 402 N at 0.5 MPa; if you require more force, step up to the SC40 bore which provides 628 N at the same pressure. For this 500 mm stroke, ensure the rod is not subjected to side loading—at full extension the slender 12 mm rod is vulnerable to bending. Use an external linear guide or switch to a guided cylinder if lateral forces are present.
When replacing an existing unit, match five points: 32 mm bore, 500 mm stroke, PT1/8 port thread, TC centre trunnion mounting (F-SC32TC), and confirm whether a magnet is needed (this model has no built-in magnet).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X500TC FAQ
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
This SC32X500TC is supplied with a TC centre trunnion mount (F-SC32TC) designed for pivoting applications. If you need a fixed foot mount, select the LB suffix instead. The trunnion bracket is included and allows the cylinder body to swing as the rod extends and retracts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X500TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.