Airtac SC32 Standard Cylinder SC32X50CB
The AirTAC Airtac SC32 Standard Cylinder SC32X50CB is a genuine double-acting standard air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X50CB
The AirTAC SC32X50CB is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 50 mm stroke suits short linear transfer and clamping operations where space is limited.
This model features a rear double clevis (CB) mount, allowing the cylinder body to pivot during operation. The 12 mm diameter piston rod and 21 mm adjustable air cushion at each end provide smooth deceleration. Ports are PT1/8 with an M10x1.25 rod thread.
Airtac SC32 Standard Cylinder SC32X50CB Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X50CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X50CB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X50CB Is Used
Small Part Ejection
Short 50 mm stroke and 402 N push force reliably eject lightweight components from conveyors or indexing tables in automated assembly cells.
Clamping & Holding
Ideal for pneumatic clamping fixtures where a compact cylinder applies consistent holding force on workpieces during machining or bonding.
Sorting Gates
The pivoting CB mount lets the cylinder body swing, making it suitable for actuating small diverter gates on packaging or sorting lines.
Is the Airtac SC32 Standard Cylinder SC32X50CB the Right Cylinder?
Choose the SC32 bore for light-duty push/pull tasks up to 724 N. If your load exceeds this, step up to the SC40 bore which provides 628 N at 0.5 MPa. For replacement, match bore (32 mm), stroke (50 mm), PT port thread, and the CB rear double clevis mounting (accessory F-SC32CB). This model does not include a magnet; if sensor feedback is needed, select the -S suffix variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X50CB FAQ
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke, so it is not dimensionally interchangeable. Only replace another AirTAC SC tie-rod cylinder with matching bore, stroke, port thread, and CB rear double clevis mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X50CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.