Airtac SC32 Standard Cylinder SC32X50FA
The AirTAC Airtac SC32 Standard Cylinder SC32X50FA is a genuine double-acting standard air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X50FA
The AirTAC SC32X50FA is a double-acting tie-rod cylinder with a 32 mm bore and 50 mm stroke, supplied with a front rectangular flange (FA) for direct panel mounting. At 0.5 MPa it generates 402 N push force, making it suitable for light clamping, sorting, and ejector tasks.
This model uses a 12 mm diameter piston rod with an M10x1.25 knuckle thread and PT1/8 ports. The adjustable air cushion (21 mm length) decelerates the piston smoothly at stroke end. The FA flange (part F-SC32FA) bolts to the rod-end face, simplifying installation on machine frames.
Airtac SC32 Standard Cylinder SC32X50FA Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X50FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X50FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X50FA Is Used
Small-Part Ejection
The 50 mm stroke and 402 N push force reliably eject lightweight plastic or metal parts from injection molds and pick-and-place nests.
Diverter Gate Actuation
Front-flange mounting allows the cylinder to be fixed directly to a conveyor side frame, actuating a small diverter gate for product sorting lines.
Light Clamping Fixtures
Delivers controlled clamping force for holding small workpieces during drilling, gluing, or ultrasonic welding, with adjustable cushioning to reduce impact.
Is the Airtac SC32 Standard Cylinder SC32X50FA the Right Cylinder?
Choose the SC32X50FA when you need a compact 32 mm bore cylinder with a front flange for end-face mounting. If your load exceeds 402 N at 0.5 MPa, step up to the SC40 series (628 N push at 0.5 MPa). For a direct drop-in replacement, match bore (32 mm), stroke (50 mm), PT1/8 port thread, front FA flange mount, and confirm the magnet option is not required. The short 50 mm stroke keeps the rod well-supported inside the barrel, so side-load risk is minimal in this configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X50FA FAQ
At the standard operating pressure of 0.5 MPa, the push force is 402 N. At 0.7 MPa it reaches 563 N, and at the maximum operating pressure of 0.9 MPa it delivers 724 N.
Yes, provided the original is an AirTAC SC tie-rod cylinder with a 32 mm bore, 50 mm stroke, PT1/8 ports, and front FA flange. The SC series is shorter than ISO 15552 cylinders, so it is not a direct dimensional interchange for those profiles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X50FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.