Airtac SC32 Standard Cylinder SC32X50SCB
The AirTAC Airtac SC32 Standard Cylinder SC32X50SCB is a genuine double-acting standard air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X50SCB
The AirTAC SC32X50SCB is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm air cushion at each end provide reliable deceleration for light automation tasks.
This model includes a built-in magnet for easy mounting of CMSG/DMSG/EMSG sensors and a rear double clevis (CB) mount, allowing the cylinder to pivot on a single pin. The 50 mm stroke suits short linear movements in confined spaces.
Airtac SC32 Standard Cylinder SC32X50SCB Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X50SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X50SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X50SCB Is Used
Small Part Clamping
Ideal for light clamping fixtures where the 402 N force securely holds components during assembly or machining without damaging delicate parts.
Sorting Gates
Operates small diverter gates on compact conveyor systems, using the CB mount to pivot the cylinder body as it actuates.
Lab Automation
Provides precise linear motion in laboratory sample handling equipment, with the magnet enabling end-of-stroke position feedback.
Is the Airtac SC32 Standard Cylinder SC32X50SCB the Right Cylinder?
For higher force requirements, the SC40 bore steps up to 628 N at 0.5 MPa, while the SC25 bore is unavailable in this tie-rod series. Always match replacement cylinders by bore, stroke, PT port thread, CB mounting, and the -S magnet option. The 50 mm stroke is well within the standard range, ensuring quick availability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X50SCB FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes, the -S suffix indicates a built-in magnet, making it compatible with AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors that clamp onto the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X50SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.