Airtac SC32 Standard Cylinder SC32X50SN
The AirTAC Airtac SC32 Standard Cylinder SC32X50SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X50SN
The SC32X50SN is a compact 32 mm bore double-acting pneumatic cylinder with a 50 mm standard stroke, delivering a push force of 402 N at 0.5 MPa. Its 12 mm diameter piston rod and M10x1.25 rod thread suit light-duty clamping and positioning tasks where space is limited.
This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling rod-position feedback without external brackets. The NBR seal (-N suffix) provides reliable sealing for general industrial air service, and the PT1/8 port thread keeps the pneumatic connection standard.
Airtac SC32 Standard Cylinder SC32X50SN Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X50SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X50SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X50SN Is Used
Small Part Ejection
Compact 50 mm stroke ejects lightweight components from assembly nests, with sensor confirmation of rod position.
Lab Automation Gates
Operates small diverter gates on benchtop analyzers; NBR seals handle clean, dry compressed air in controlled environments.
Miniature Conveyor Stops
Acts as a low-force stop for lightweight products on small belt conveyors, with magnet sensor verifying retraction.
Is the Airtac SC32 Standard Cylinder SC32X50SN the Right Cylinder?
Choose the SC32X50SN for light push/pull operations up to 724 N at the maximum operating pressure of 0.9 MPa. If your application requires more force, step up to the 40 mm bore (SC40 series), which provides 628 N at 0.5 MPa. For side-load applications, especially as stroke increases, consider an external guide or a guided cylinder to protect the 12 mm rod from bending. When replacing, match bore (32 mm), stroke (50 mm), PT port thread, NBR seal, and the built-in magnet feature.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X50SN FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, so you can mount CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X50SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.