Airtac SC32 Standard Cylinder SC32X55CA
The AirTAC Airtac SC32 Standard Cylinder SC32X55CA is a genuine double-acting standard air cylinder with a Ø32mm bore and 55mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke55 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X55CA
The SC32X55CA is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the maximum operating pressure of 0.9 MPa). Its 55 mm stroke is ideal for short-throw clamping, ejecting, or sorting tasks where space is limited and cycle speed is a priority.
This model features a 12 mm diameter piston rod with an M10x1.25 thread and a rear single clevis (CA) mount, part number F-SC32CA, allowing the cylinder body to pivot during operation. The adjustable air cushion, with a 21 mm cushion length, decelerates the piston smoothly at each end of stroke, reducing impact noise and vibration in high-speed applications up to 800 mm/s.
Airtac SC32 Standard Cylinder SC32X55CA Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X55CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X55CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X55CA Is Used
Small Part Sorting
The 55 mm stroke and 402 N push force at 0.5 MPa are well-suited for diverting lightweight packages or components on a conveyor line, where the rear clevis mount allows the cylinder to follow the gate's arc.
Assembly Fixture Clamping
Provides a controlled 724 N clamping force at 0.9 MPa for holding small workpieces during drilling, gluing, or soldering operations. The adjustable cushion protects the fixture from repeated impact.
Tensioning Mechanism
Use the SC32X55CA in a pivoting tensioner for a belt or chain drive. The CA clevis mount allows the cylinder to self-align, while the double-acting function provides consistent retraction force of 345 N at 0.5 MPa.
Is the Airtac SC32 Standard Cylinder SC32X55CA the Right Cylinder?
Select the SC32X55CA for light-duty applications requiring a pivoting rear mount. If your force requirement exceeds the 724 N maximum push force of this 32 mm bore, consider stepping up to the SC40 series, which provides 628 N of push force at just 0.5 MPa. For strokes of 300 mm or more, evaluate side-load conditions carefully; a long, unsupported 12 mm rod is susceptible to bending under lateral forces.
To ensure a direct replacement, match five key specifications: the 32 mm bore, the 55 mm stroke, the PT1/8 port thread, the CA rear single clevis mounting, and the absence of a built-in magnet on this model. This cylinder is a genuine AirTAC tie-rod design, which is dimensionally shorter than a standard ISO 15552 cylinder and is not interchangeable with that profile.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X55CA FAQ
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than a comparable ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC32 cylinder with matching stroke, PT ports, and CA rear clevis mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X55CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.