Airtac SC32 Standard Cylinder SC32X560S
The AirTAC Airtac SC32 Standard Cylinder SC32X560S is a genuine double-acting standard air cylinder with a Ø32mm bore and 560mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke560 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X560S
The AirTAC SC32X560S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and a non-standard 560 mm stroke, built for applications needing extended reach in a compact tie-rod body. It delivers 402 N of push force at 0.5 MPa (724 N at 0.9 MPa) and features a 12 mm diameter piston rod with M10x1.25 male threads.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The cylinder uses adjustable pneumatic cushioning (21 mm cushion length) to decelerate the piston smoothly, with PT1/8 ports and a body length A of 140 mm.
Airtac SC32 Standard Cylinder SC32X560S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X560S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 560 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X560S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×560 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X560S Is Used
Material Stop Gates
The 560 mm stroke and sensor-ready magnet allow precise end-of-stroke detection for diverting or stopping light packages on conveyor lines.
Automated Test Fixtures
Extended reach with magnetic piston sensing suits test stations where a probe must advance deep into a part and confirm position before cycling.
Long-Reach Pushers
Pushes light totes or cartons off a line with 402 N of force at standard shop air, with CMSG sensors verifying full retraction.
Is the Airtac SC32 Standard Cylinder SC32X560S the Right Cylinder?
For higher force, step up to the SC40 bore (628 N at 0.5 MPa); for a lighter, more compact actuator, the SC32 is the smallest standard SC bore. This 560 mm stroke exceeds the 1000 mm maximum standard stroke for bore 32, making it a non-standard made-to-order length. At this extended stroke, avoid unsupported side loads—the 12 mm rod can bend under lateral force; use an external linear guide or rod-alignment coupler. When replacing, match bore (32 mm), stroke (560 mm), PT1/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X560S FAQ
At 0.7 MPa (7 bar) supply pressure, the 32 mm bore generates 563 N of push force. The pull force on the return stroke is lower due to the 12 mm rod area, delivering 345 N at 0.5 MPa.
Yes. The -S suffix indicates a built-in magnet on the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X560S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.