The AirTAC Airtac SC32 Standard Cylinder SC32X565S is a genuine double-acting standard air cylinder with a Ø32mm bore and 565mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X565S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and a non-standard 565 mm stroke. It delivers 402 N of push force at 0.5 MPa and up to 724 N at 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 thread.
This model includes a built-in -S magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for contactless position sensing. The cylinder features an adjustable air cushion (21 mm length) and PT1/8 ports, with a body length A of 140 mm.
| Model | Airtac SC32 Standard Cylinder SC32X565S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 565 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×565 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The long 565 mm stroke and compact 32 mm bore suit lightweight diverter gates on packaging lines, where the built-in magnet provides end-of-stroke confirmation to the PLC.
Extends a tamp pad over a long distance to apply labels on recessed product surfaces. Sensor feedback from the -S magnet ensures consistent application pressure.
Moves test tubes or vials between stations in a laboratory automation setup. The clean, oil-free air operation and adjustable cushion protect delicate samples from jarring stops.
For applications requiring more force, consider stepping up to the SC40 bore, which provides 628 N at 0.5 MPa. The 565 mm stroke on this 32 mm bore is non-standard, so lead times may be longer than standard strokes up to 1000 mm. With a long, slender 12 mm rod, avoid direct side loads; use an external linear guide or a guided cylinder to prevent rod bending and premature bearing wear.
When replacing an existing unit, match five key points: 32 mm bore, exact stroke, PT1/8 port thread, the basic mounting configuration, and the -S magnet for sensor compatibility.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N. At 0.7 MPa it pushes with 563 N, and at the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, so you can clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the tie-rod barrel to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.