The AirTAC Airtac SC32 Standard Cylinder SC32X570S is a genuine double-acting standard air cylinder with a Ø32mm bore and 570mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X570S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and a non-standard 570 mm stroke, exceeding the standard maximum of 1000 mm for this bore. It generates a push force of 402 N at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 knuckle thread.
The built-in magnet (suffix -S) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the tie-rod barrel for contactless position sensing. This model uses PT1/8 ports, standard TPU/NBR seals for a -20 to +70 °C operating range, and an adjustable pneumatic cushion to decelerate the piston smoothly at stroke end.
| Model | Airtac SC32 Standard Cylinder SC32X570S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 570 mm stroke and compact 32 mm bore body suit long-reach diverter gates on narrow conveyors, where the built-in magnet provides end-of-stroke confirmation via a DMSG sensor.
Delivers a light 402 N push at standard line pressure to clamp or probe delicate assemblies in electronics testing, with sensor feedback ensuring the cylinder has fully extended before measurement.
The long 570 mm stroke pushes products across a wide lane into a label applicator. The adjustable cushion protects the applicator head from impact damage at the end of travel.
For applications requiring more force, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. This 570 mm stroke is a long, non-standard length for a 32 mm bore; the 12 mm rod is slender, and side loads or high-speed cycling can cause rod bending or bearing wear. Always use an external linear guide or rod alignment coupler to protect the rod and seals in such configurations.
To ensure a correct replacement, match five key points: 32 mm bore, 570 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with those designs.
Quick checklist
At 0.5 MPa, the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 mounts. For a direct replacement, match the bore, stroke, port thread, and mounting style to another SC series cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.