The AirTAC Airtac SC32 Standard Cylinder SC32X57S is a genuine double-acting standard air cylinder with a Ø32mm bore and 57mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X57 is a compact double-acting tie-rod cylinder delivering a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With a 57 mm stroke and a 12 mm diameter piston rod, it fits neatly into light automation tasks where space and cycle speed are priorities.
This model features a 140 mm body length (A dimension) and an adjustable pneumatic cushion of 21 mm at each end to decelerate the piston smoothly. The standard PT1/8 ports and M10x1.25 rod thread make it straightforward to plumb and connect, while the TPU seals provide reliable operation from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X57S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 57 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×57 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 57 mm stroke and 402 N push force at 0.5 MPa reliably eject lightweight plastic or metal components from pick-and-place nests and assembly fixtures.
Operates small diverter gates or lane guides on compact conveyor systems. The adjustable cushion reduces impact noise at the end of the short, rapid stroke.
Applies consistent, low-force clamping for test tubes, vials, or microplates in laboratory automation workstations where a 57 mm stroke provides sufficient jaw travel.
Choose the SC32X57 for light push/pull duties up to 724 N. If your load requires more force, step up to the SC40 series, which provides 628 N at 0.5 MPa. For strokes of 300 mm or longer on a 12 mm rod, consider an external guide to prevent rod bending under side load.
To replace an existing cylinder, match five points exactly: 32 mm bore, 57 mm stroke, PT1/8 port thread, basic (no mounting accessory), and no magnet. This ensures dimensional and performance interchangeability with another AirTAC SC32 tie-rod cylinder.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC32X57 is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is lost or the directional valve is centred, the piston can drift. For load holding without live pressure, add a pilot-operated check valve or an external rod brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.