verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC32 Standard Cylinder SC32X580S

The AirTAC SC32 Standard Cylinder SC32X580S is a genuine double-acting standard air cylinder with a Ø32mm bore and 580mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ32 mm
  • Stroke580 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 21 mm
$62.77 $70.27Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC32 stroke, mounting and version on one page All SC32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC32 Standard Cylinder SC32X580S

The AirTAC SC32X580S is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. This model features a 32 mm bore with a 12 mm diameter piston rod and an M10x1.25 rod thread, specifically configured with a non-standard 580 mm stroke that exceeds the standard 1000 mm maximum for this bore.

The built-in magnet (denoted by the -S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise position feedback. Equipped with adjustable pneumatic cushioning (21 mm cushion length) and PT1/8 ports, this TPU-sealed cylinder operates reliably in temperatures from -20 to +70 °C.

Airtac SC32 Standard Cylinder SC32X580S Technical Specifications

ModelAirtac SC32 Standard Cylinder SC32X580S
SeriesSC standard tie-rod cylinder
Bore sizeØ32 mm
Stroke580 mm
Acting typeDouble acting
Port sizePT1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (approx.)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC32 Standard Cylinder SC32X580S

SCStandard tie-rod cylinder series.
32Bore size in mm.
×580Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC32 Standard Cylinder SC32X580S Is Used

precision_manufacturing

Automated Sorting Gates

The 580 mm stroke and integrated magnetic piston allow multi-position sensing along the travel path, ideal for diverting small packages on conveyor lines where sensor feedback confirms gate open/close status.

biotech

Laboratory Sampler Actuation

Delivers clean, oil-free actuation for extended-reach sampling probes in diagnostic equipment, with the 724 N max force providing ample power for piercing septa or moving vial trays.

warehouse

Compact Material Pusher

Pushes lightweight totes or cartons off a belt at 402 N force. The long 580 mm stroke reaches across wide conveyor beds, while the adjustable cushion minimizes noise and impact at end-of-stroke.

Is the Airtac SC32 Standard Cylinder SC32X580S the Right Cylinder?

Select the SC32 bore for compact pneumatic tasks where its 402 N push at 0.5 MPa is sufficient. If your application requires higher force, step up to the SC40 bore, which provides 628 N at the same pressure. For this 580 mm stroke length, carefully evaluate side-load conditions; long, unsupported strokes on a 12 mm rod are susceptible to bending under lateral forces, and an external linear guide or a guided cylinder configuration is strongly recommended to protect the rod bearing and seals.

When replacing an existing cylinder, ensure a 5-point match: 32 mm bore, 580 mm stroke, PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting style. This SC model is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC32 Standard Cylinder SC32X580S FAQ

At 0.7 MPa operating pressure, the SC32 bore produces a theoretical push force of 563 N. The maximum force at 0.9 MPa is 724 N, and the theoretical maximum at 1.0 MPa is 82 kgf.

Yes. The -S suffix indicates a built-in magnet in the piston, making this cylinder fully compatible with AirTAC CMSG, DMSG, and EMSG series sensors that clamp directly onto the barrel's tie-rod slots for non-contact position detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC32 Standard Cylinder SC32X580S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC32X580S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.