Airtac SC32 Standard Cylinder SC32X600
The AirTAC Airtac SC32 Standard Cylinder SC32X600 is a genuine double-acting standard air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke600 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X600
The SC32X600 is a double-acting tie-rod cylinder with a 32 mm bore and an extended 600 mm stroke, which exceeds the standard maximum of 1000 mm for this bore and is therefore a non-standard made-to-order length. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
With a body length A of 140 mm and a 21 mm adjustable air cushion at each end, this cylinder decelerates the piston smoothly to reduce end-of-stroke impact. The total extended length is approximately 740 mm, making it suitable for long-reach applications where space permits the non-standard stroke. It uses a PT1/8 port and an M10x1.25 rod thread for standard pneumatic connections.
Airtac SC32 Standard Cylinder SC32X600 Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X600 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X600
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X600 Is Used
Light Part Transfer
The 600 mm stroke moves small components between conveyor lanes or indexing stations where a 402 N push force is sufficient for lightweight payloads.
Material Sampling
Extends a sampling probe or sensor into a process stream, retracting fully to clear the line, using the long 600 mm reach in a compact 32 mm bore envelope.
Bin Picking Assist
Operates a small gate or diverter arm in automated storage systems, providing 724 N of maximum thrust to reliably actuate lightweight mechanisms.
Is the Airtac SC32 Standard Cylinder SC32X600 the Right Cylinder?
Select the SC32X600 when your application needs a light push force of 402 N at 0.5 MPa in a compact 32 mm bore. If you require more force, step up to the SC40 bore which provides 628 N at the same pressure. For this 600 mm stroke, the slender 12 mm rod is susceptible to bending under side loads; always guide the load externally or use a guided cylinder to protect the rod bearing and seals.
When replacing an existing cylinder, match five key points: the 32 mm bore, the 600 mm stroke, the PT1/8 port thread, the basic (no bracket) mounting configuration, and the absence of a built-in magnet. This ensures a direct dimensional and functional swap with another AirTAC SC32 tie-rod unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X600 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No, the maximum standard stroke for the 32 mm bore is 1000 mm. A 600 mm stroke is non-standard and may require a made-to-order lead time. Always confirm availability for this specific length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.