The AirTAC Airtac SC32 Standard Cylinder SC32X600S is a genuine double-acting standard air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X600S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and a non-standard 600 mm stroke, exceeding the standard 500 mm maximum for this bore size. It delivers a push force of 402 N at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 knuckle thread.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for precise position feedback. The adjustable air cushion at each end (21 mm cushion length) decelerates the piston smoothly, and the PT1/8 port threads ensure straightforward pneumatic connections.
| Model | Airtac SC32 Standard Cylinder SC32X600S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 600 mm reach and sensor-ready design make it ideal for ejecting lightweight components from injection molding machines, where end-of-stroke confirmation is critical.
Operates diverter gates on compact conveyor lines. The built-in magnet enables simple retrofitting of position sensors to verify gate open/close status.
Extends to 600 mm to push products into labeling stations. The adjustable cushion protects the labeler from impact shock, maintaining alignment.
For applications requiring higher force, stepping up to the 40 mm bore SC40 series provides 628 N of push force at 0.5 MPa. At a 600 mm stroke, the slender 12 mm rod is susceptible to bending under side loads; an external linear guide or a guided cylinder should be used to protect the rod bearing and seals. When replacing this cylinder, match the 32 mm bore, 600 mm stroke, PT1/8 ports, basic mounting, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
At the standard factory pressure of 0.7 MPa, the push force is 563 N. The maximum push force at the 0.9 MPa operating limit is 724 N. The theoretical pull force at 0.5 MPa is 345 N.
No, 600 mm is a non-standard stroke for the 32 mm bore (max standard is 500 mm). For strokes over 300 mm, side loads can bend the 12 mm rod. Use an external guide rail or mount the cylinder with a rod-end joint to prevent seal wear and bearing damage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.