The AirTAC Airtac SC32 Standard Cylinder SC32X600STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X600STC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. Its 12 mm diameter piston rod and 21 mm adjustable air cushion are engineered for reliable deceleration, while the 600 mm stroke suits extended linear movements in compact machinery.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and a centre trunnion mount (TC), supplied with the TCM1 bracket (F-SC32TC), allowing the cylinder to pivot during operation. The body length A is 140 mm, giving an approximate extended length of 740 mm.
| Model | Airtac SC32 Standard Cylinder SC32X600STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Actuating diverter gates or pushers on packaging lines where the 600 mm stroke provides the necessary reach and the pivoting trunnion mount accommodates the arc of motion.
Operating a long-stroke clamping fixture in a woodworking or assembly jig, using the built-in magnet for end-of-stroke confirmation via reed sensors.
Positioning a scanning head or nozzle across a wide test bed, where the adjustable cushion ensures smooth, low-impact stops at high cycling speeds to protect sensitive equipment.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N of push at 0.5 MPa. At a 600 mm stroke, the 12 mm rod is susceptible to bending under side loads; always use an external guide or linear bearing to absorb lateral forces and protect the rod bearings. To ensure a correct replacement, match five points: 32 mm bore, 600 mm stroke, PT port thread, centre trunnion (TC) mounting accessory, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
At 0.5 MPa, the SC32X600STC provides 402 N extending and 345 N retracting. The maximum force at 0.9 MPa is 724 N extending. The theoretical maximum at 1.0 MPa is 82 kgf.
This is a non-standard replacement for other AirTAC SC32 tie-rod cylinders. It will only directly interchange with another SC32 of the same 600 mm stroke that also has a PT port, centre trunnion (TC) mount, and a built-in magnet. It is not dimensionally interchangeable with ISO 15552 cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.