The AirTAC Airtac SC32 Standard Cylinder SC32X60FA is a genuine double-acting standard air cylinder with a Ø32mm bore and 60mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X60FA is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 32 mm bore with a 60 mm stroke. It generates a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 thread.
This configuration includes a front rectangular flange (FA) for secure end-face mounting, part number F-SC32FA. The cylinder body length is 140 mm, resulting in a total extended length of approximately 200 mm. Standard PT1/8 ports and adjustable pneumatic cushioning are integrated for reliable deceleration.
| Model | Airtac SC32 Standard Cylinder SC32X60FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N force at 0.5 MPa is ideal for fixturing and holding lightweight components during assembly or light machining operations.
The 60 mm stroke provides a quick, decisive push to divert small packages or parts on a conveyor line, with the FA flange ensuring rigid alignment.
Compact and clean, this 32 mm bore cylinder fits bench-top test fixtures and fluid handling systems requiring precise, repeatable linear motion.
For applications needing slightly more force, stepping up to the 40 mm bore SC40 series provides 628 N of push at the same 0.5 MPa pressure. The SC32X60FA is well-suited for light clamping and sorting tasks where its 12 mm rod is adequately supported against side loads.
When replacing an existing cylinder, match five key points: 32 mm bore, 60 mm stroke, PT port thread, FA front flange mounting, and the absence of a built-in magnet. This model uses the standard TPU seals rated for -20 to +70 °C.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes, the FA suffix designates a front rectangular flange (F-SC32FA) that bolts directly to a panel or bulkhead, providing rigid support at the rod end of the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.