The AirTAC Airtac SC32 Standard Cylinder SC32X60SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 60mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X60SN is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With a 60 mm stroke and a 12 mm diameter piston rod, it suits short linear actuation tasks where space is limited.
This model is factory-equipped with a built-in magnet (suffix S), allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for non-contact position sensing. The N suffix specifies NBR (nitrile) seals, providing reliable sealing for standard industrial air. The body length A is 140 mm, and the port size is PT1/8.
| Model | Airtac SC32 Standard Cylinder SC32X60SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for ejecting lightweight plastic or metal components from small molds or fixtures in automated assembly cells.
Actuates small sorting gates or diverters on compact conveyor lines. The built-in magnet simplifies sensor mounting for end-of-stroke detection in tight spaces.
Provides clean, controlled linear motion for test tube handling, pipetting mechanisms, or sample positioning in laboratory automation equipment.
For applications needing slightly more force, consider stepping up to the 40 mm bore SC40 series, which provides 628 N of push at 0.5 MPa. When replacing an existing cylinder, ensure a 5-point match: 32 mm bore, 60 mm stroke, PT1/8 port thread, the built-in magnet option, and the NBR seal material. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa air pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes, the 'S' in the model code indicates a built-in magnet. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be mounted directly on the cylinder barrel for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.