The AirTAC Airtac SC32 Standard Cylinder SC32X610 is a genuine double-acting standard air cylinder with a Ø32mm bore and 610mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X610 is a double-acting tie-rod cylinder with a 32 mm bore and a 610 mm stroke. This non-standard stroke length exceeds the 1000 mm maximum standard stroke for the 32 mm bore, making it a made-to-order unit for applications needing a precise intermediate travel. It generates 402 N of pushing force at 0.5 MPa and up to 724 N at 0.9 MPa.
Built with a 12 mm diameter piston rod and an M10x1.25 rod thread, this cylinder includes an adjustable air cushion to decelerate the piston smoothly at stroke end. The body length A is 140 mm, and the total extended length is approximately 750 mm. Ports are PT1/8 with PT thread, and the standard TPU seals offer an operating temperature range of -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X610 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 610 mm stroke pushes components across a conveyor to multiple sorting lanes, with adjustable cushioning protecting the parts at end-of-travel.
Moves thin sheet material into a stamping press. The 724 N max force at 0.9 MPa is sufficient for lightweight blanks, and the tie-rod design allows for easy maintenance.
Provides a long, repeatable stroke for life-cycle testing of small mechanisms, where the 402 N push force at 0.5 MPa offers a controlled, moderate load.
Select the SC32X610 when your application requires a force of around 402 N at 0.5 MPa and a stroke of 610 mm. If you need more force, consider stepping up to the 40 mm bore, which provides 628 N at the same pressure. For strokes of this length with a 12 mm rod, avoid side loading; use an external linear guide to prevent rod bending and premature seal wear.
To ensure a correct replacement, match five key points: bore (32 mm), stroke (610 mm), port thread (PT1/8), mounting accessory (basic, no bracket), and magnet option (none). This cylinder is a direct fit for another AirTAC SC32X610 of the same configuration.
Quick checklist
At 0.7 MPa operating pressure, the SC32X610 delivers a pushing force of 563 N. The maximum force at 0.9 MPa is 724 N. Always regulate pressure to match your load requirements.
No, the maximum standard stroke for the 32 mm bore is 1000 mm, but 610 mm is not a listed standard stroke. This is a non-standard, made-to-order length. For long strokes like this, ensure the rod is externally guided to prevent bending under side loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.