The AirTAC Airtac SC32 Standard Cylinder SC32X610S is a genuine double-acting standard air cylinder with a Ø32mm bore and 610mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X610S is a double-acting single-rod tie-rod cylinder with a 32 mm bore and a non-standard 610 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). The built-in magnet (-S suffix) allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for reliable end-of-stroke detection.
This model features a 12 mm piston rod with M10x1.25 knuckle threads and PT1/8 ports. With a body length A of 140 mm and a 21 mm adjustable air cushion, the extended length reaches approximately 750 mm. Because the stroke exceeds the 1000 mm maximum standard stroke for this bore, it is a made-to-order configuration.
| Model | Airtac SC32 Standard Cylinder SC32X610S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 610 mm stroke and compact 32 mm bore suit lightweight diverters and sorting gates on conveyors, with the built-in magnet providing sensor feedback to the PLC.
Ideal for pushing small components between assembly stations. The adjustable cushion decelerates the load quietly at the end of the 402 N thrust stroke.
Used to eject lightweight cartons or pouches from a packaging line. The non-standard 610 mm stroke reaches across wide belts without requiring a larger, heavier cylinder.
Choose the SC32 when your application requires a compact tie-rod cylinder with moderate force. If the 402 N push force at 0.5 MPa is insufficient, stepping up to the SC40 bore provides 628 N at the same pressure. For this 610 mm stroke, consider external guides or a guided cylinder if the load applies any side force, as the 12 mm rod is susceptible to bending under long unsupported strokes.
For a direct replacement, match five key points: 32 mm bore, 610 mm stroke, PT1/8 port thread, the built-in magnet (-S) for sensor mounting, and the basic (no bracket) mounting configuration. This is an AirTAC SC tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, making it compatible with AirTAC CMSG, DMSG, and EMSG series sensors that clamp onto the barrel tie-rods for non-contact position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.