Airtac SC32 Standard Cylinder SC32X615S
The AirTAC Airtac SC32 Standard Cylinder SC32X615S is a genuine double-acting standard air cylinder with a Ø32mm bore and 615mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke615 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X615S
The AirTAC SC32X615S is a double-acting single-rod tie-rod cylinder with a 32 mm bore and a non-standard 615 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa max operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth end-of-stroke deceleration, while the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for reliable position feedback.
This extended 615 mm stroke suits applications requiring long linear travel in a compact footprint. The cylinder body length A is 140 mm, giving a total extended length of approximately 755 mm. As a genuine AirTAC component, it uses filtered air (40 µm) and operates within a -20 to +70 °C range with standard TPU seals.
Airtac SC32 Standard Cylinder SC32X615S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X615S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 615 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X615S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×615 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X615S Is Used
Automated Sorting Gates
The 615 mm stroke and magnetic piston sensing provide precise, long-reach actuation for diverting packages or parts on conveyor lines, with sensor confirmation at each end of travel.
Long-Stroke Material Pushers
Ideal for pushing products off a wide belt or into a packaging station, the 402 N force at 0.5 MPa handles moderate loads over the full 615 mm travel distance.
Sensor-Monitored Clamping
The built-in magnet enables easy addition of reed or solid-state sensors to verify clamp position on large fixtures or welding jigs, even with the extended 615 mm stroke.
Is the Airtac SC32 Standard Cylinder SC32X615S the Right Cylinder?
Select the SC32X615S when your application needs a 32 mm bore with a long 615 mm reach and magnetic piston sensing. For higher force, step up to the SC40 bore which provides 628 N at 0.5 MPa. At this stroke length, the 12 mm rod is susceptible to bending under side loads; use an external guide or a guided cylinder to protect the rod bearings and ensure linear motion. For a drop-in replacement, match the 32 mm bore, 615 mm stroke, PT1/8 port thread, basic mounting, and the -S magnet option exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X615S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Match the 32 mm bore, 615 mm non-standard stroke, PT1/8 port thread, and the -S magnet option. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC32 of the same configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X615S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.