The AirTAC Airtac SC32 Standard Cylinder SC32X65TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 65mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X65TC is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). The 65 mm stroke is a standard length within the 32 mm bore series, which offers a maximum standard stroke of 1000 mm. This model features a 12 mm diameter piston rod with an M10x1.25 knuckle thread and PT1/8 ports.
This specific configuration includes the TC centre trunnion mounting (supplied with the TCM1 bracket, part code F-SC32TC). The trunnion allows the cylinder body to pivot, making it ideal for applications where the load follows an arc. The cylinder uses adjustable pneumatic cushioning with a 21 mm cushion length to decelerate the piston smoothly at end-of-stroke, reducing impact and noise.
| Model | Airtac SC32 Standard Cylinder SC32X65TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The pivoting action of the TC trunnion mount and the 65 mm stroke make this cylinder suitable for small diverter gates on packaging conveyors, sorting light products between lanes.
With 724 N of clamping force available at 0.9 MPa, the SC32X65TC can securely hold small components during gluing, ultrasonic welding, or light machining operations.
The adjustable cushioning and predictable 402 N push force at 0.5 MPa allow precise, repeatable movement in laboratory test rigs and quality-inspection fixtures.
Choose the SC32 bore for light pneumatic tasks where the 402 N push force at 0.5 MPa is sufficient. If your application requires more force, step up to the SC40 bore, which provides 628 N at the same pressure. For strokes of 65 mm, the standard tie-rod design offers good rigidity, but always ensure the load is axially aligned to prevent bending stress on the 12 mm rod.
To replace an existing cylinder, match five key points: the 32 mm bore, 65 mm stroke, PT1/8 port thread, TC centre trunnion mounting, and the absence of a magnetic piston. This ensures a direct dimensional and functional swap with another AirTAC SC32 series cylinder.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No, this specific model code does not include the '-S' magnet suffix. The piston does not have a built-in magnet, so CMSG/DMSG/EMSG sensors cannot be used. To use sensors, order model SC32X65STC.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.