The AirTAC Airtac SC32 Standard Cylinder SC32X700S is a genuine double-acting standard air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X700S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa, scaling to 724 N at the maximum operating pressure of 0.9 MPa. With a 32 mm bore and a 700 mm stroke, it features a 12 mm diameter piston rod and an adjustable air cushion length of 21 mm to decelerate end-of-stroke impact.
This model includes the -S suffix, indicating a built-in magnet along the barrel. This allows easy, non-invasive mounting of CMSG, DMSG, or EMSG reed and solid-state sensors for precise position feedback. The body length A is 140 mm, making the total extended length approximately 840 mm.
| Model | Airtac SC32 Standard Cylinder SC32X700S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 700 mm stroke and sensor-ready magnet make this ideal for long-throw diverter gates on packaging lines, where end-of-stroke confirmation is required for process control.
Provides the extended linear travel needed for applying adhesive beads across wide panels. The built-in magnet allows for multi-point position sensing along the 700 mm stroke.
Suitable for pushing finished parts off a wide conveyor into a bin. The 724 N maximum force at 0.9 MPa handles stubborn or heavy items reliably.
For applications needing more force, stepping up to the 40 mm bore SC40 series offers 628 N of push force at 0.5 MPa. The SC32X700S is a standard-stroke model, as the maximum standard stroke for a 32 mm bore is 1000 mm. For a direct replacement, match these five points: 32 mm bore, 700 mm stroke, PT1/8 port thread, basic mounting, and the built-in magnet (-S) for sensor compatibility.
At a 700 mm stroke, the 12 mm rod is susceptible to bending under side loads. Avoid direct lateral force on the rod end; instead, use an external guide rail or a guided cylinder to absorb the load and protect the rod bearing and seals from premature wear.
Quick checklist
The theoretical push force at 0.5 MPa is 402 N, and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The maximum theoretical force at 1.0 MPa is 82 kgf.
Yes. The -S suffix confirms a built-in magnet, so you can directly clamp AirTAC CMSG, DMSG, or EMSG sensors onto the barrel without any additional brackets or modifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.