The AirTAC Airtac SC32 Standard Cylinder SC32X700SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X700SH is a double-acting tie-rod cylinder with a 32 mm bore and a 700 mm stroke, equipped with a built-in magnet (-S) and high-temperature Viton seals (H), shifting its operating range to 0–150 °C. It produces a push force of 402 N at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
This model features PT1/8 port threads and an M10x1.25 rod thread for direct knuckle attachment. The adjustable pneumatic cushion at each end (21 mm length) decelerates the piston smoothly, while the body length A of 140 mm results in a total extended length of approximately 840 mm. The built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors on the barrel for contactless position sensing.
| Model | Airtac SC32 Standard Cylinder SC32X700SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The Viton seals and built-in magnet make this cylinder ideal for material handling or actuation inside ovens, autoclaves, or drying chambers where ambient temperatures reach up to 150°C.
With the integrated magnet, CMSG/DMSG sensors provide end-of-stroke confirmation for pick-and-place units or light press fixtures, ensuring cycle completion in automated assembly lines.
Use the 700 mm stroke to push hot components off a conveyor or into a cooling lane, where standard seals would degrade, and sensor feedback confirms gate position.
Select the SC32X700SH for light to medium-duty pneumatic tasks where a 700 mm stroke and high-temperature tolerance are required. If the 402 N push force at 0.5 MPa is insufficient, stepping up to the 40 mm bore (SC40 series) provides 628 N at the same pressure. For strokes of 300 mm or more, always evaluate side-loading on the 12 mm rod—external linear guides or a guided cylinder are recommended to prevent rod bending and premature bearing wear.
To ensure a drop-in replacement, match five key specifications: the 32 mm bore, the full 700 mm stroke, the PT1/8 port thread, the built-in magnet for sensor compatibility, and the high-temperature Viton seal material. This cylinder is a genuine AirTAC SC tie-rod design, not an ISO 15552 profile cylinder, and its shorter body length means it is dimensionally interchangeable only with another AirTAC SC32 cylinder configured identically.
Quick checklist
At the standard operating pressure of 0.5 MPa, the cylinder delivers 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is a direct dimensional match only for another AirTAC SC32 tie-rod cylinder with the same bore, stroke, port thread, magnet option, and seal material.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.