The AirTAC Airtac SC32 Standard Cylinder SC32X710S is a genuine double-acting standard air cylinder with a Ø32mm bore and 710mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X710S is a double-acting tie-rod cylinder with a 32 mm bore and a non-standard 710 mm stroke, built for applications that need a compact body with an extended reach. It delivers 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
A built-in magnet (denoted by the -S suffix) allows CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for non-contact position sensing. The cylinder uses PT1/8 ports, M10x1.25 rod threads, and an adjustable air cushion of 21 mm at each end to decelerate the piston smoothly.
| Model | Airtac SC32 Standard Cylinder SC32X710S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 710 mm stroke moves lightweight parts between distant conveyor stations, with the magnetic piston enabling end-of-stroke confirmation via barrel-mounted sensors.
Directs small packages or components on a sorting line, where the 724 N push force is sufficient for lightweight diverters and the compact 32 mm bore fits narrow machine frames.
Extends a sampling probe into a process stream with a controlled, cushioned stop, using the sensor magnet to verify full retraction before the next cycle.
This 32 mm bore model is the entry point in the SC range; if your load calculation exceeds its 724 N peak push, step up to the SC40 which provides 1130 N at 0.9 MPa from a 40 mm bore. For this 710 mm stroke, which is beyond the standard maximum of 1000 mm for the 32 mm bore, the slender 12 mm rod is more susceptible to bending under side loads—always guide the load externally or use a rod-alignment coupler to protect the bearing and seals.
When replacing an existing cylinder, match five points: the 32 mm bore, the 710 mm stroke, the PT1/8 port thread, the basic (no-bracket) mounting, and the -S magnet option. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa it pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC32X710S is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centered. For load holding without live pressure, add a pilot-operated check valve or an external rod brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.