The AirTAC Airtac SC32 Standard Cylinder SC32X720S is a genuine double-acting standard air cylinder with a Ø32mm bore and 720mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X720S is a double-acting tie-rod cylinder with a 32 mm bore and a non-standard 720 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at the maximum operating pressure of 0.9 MPa). This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for precise end-of-stroke or mid-stroke position sensing.
The 12 mm diameter piston rod and M10x1.25 rod thread are sized for light-to-medium linear tasks. With a body length A of 140 mm and a 21 mm adjustable air cushion at each end, the cylinder decelerates the piston smoothly to reduce impact noise. Its standard PT1/8 ports and TPU/NBR seals support an operating pressure range of 0.15–1.0 MPa in ambient temperatures from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X720S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 720 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×720 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 720 mm stroke and magnetic piston sensing make this cylinder ideal for long-stroke diverter gates on conveyors, where end-of-travel confirmation is required for automated sortation.
Delivers consistent 402 N force at 0.5 MPa to push components along a 720 mm linear path in assembly fixtures, with CMSG sensors verifying full extension and retraction.
Used as a long-reach stop or kicker in packaging lines, the adjustable cushion absorbs energy at stroke ends, while the magnet confirms position for palletizing logic.
This 32 mm bore cylinder suits applications needing up to 724 N of push force. If your load requires more force, stepping up to the SC40 bore provides 628 N at 0.5 MPa. For this 720 mm stroke, which exceeds the standard 1000 mm maximum for bore 32, it is a made-to-order item. Long strokes with a 12 mm rod carry a risk of bending under side load; use an external linear guide or a guided cylinder if the load is not perfectly axial. For direct replacement, match the 32 mm bore, 720 mm stroke, PT1/8 ports, basic mounting, and the built-in magnet (-S) sensor compatibility.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, push force increases to 563 N, and at the maximum operating pressure of 0.9 MPa, it reaches 724 N.
Match five key points: 32 mm bore, 720 mm stroke, PT1/8 port thread, basic (no accessory) mounting, and the built-in magnet (-S) for sensor compatibility. Also confirm the M10x1.25 rod thread and 12 mm rod diameter. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC series cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.