Airtac SC32 Standard Cylinder SC32X730S
The AirTAC Airtac SC32 Standard Cylinder SC32X730S is a genuine double-acting standard air cylinder with a Ø32mm bore and 730mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke730 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X730S
The AirTAC SC32X730S is a double-acting tie-rod cylinder with a 32 mm bore and a non-standard 730 mm stroke. It delivers 402 N of push force at 0.5 MPa (724 N at 0.9 MPa), making it suitable for light-duty linear tasks requiring an extended reach. The 12 mm diameter rod and 21 mm adjustable air cushion ensure smooth deceleration.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for precise position feedback. The body length A is 140 mm, and the total extended length is approximately 870 mm. Ports are PT1/8 with an M10x1.25 rod thread.
Airtac SC32 Standard Cylinder SC32X730S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X730S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 730 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X730S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×730 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X730S Is Used
Small Part Sorting
The 730 mm stroke and sensor-ready magnet make this cylinder ideal for diverting or sorting small packages on conveyor lines, where mid-stroke position confirmation is required.
Automated Labeling
Delivers a light, controlled push force for label applicators. The built-in magnet allows sensors to verify full extension and retraction at high cycle rates.
Test Fixture Actuation
Used in laboratory test rigs requiring a long, repeatable stroke. The adjustable cushion protects delicate samples at the end of travel, and magnetic sensors provide precise cycle counting.
Is the Airtac SC32 Standard Cylinder SC32X730S the Right Cylinder?
Choose the SC32 bore for light thrust applications up to 724 N. If your load exceeds this, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For this 730 mm stroke, which is a non-standard length for the 32 mm bore, ensure the rod is protected from side loading. Long, unsupported strokes on a 12 mm rod are susceptible to bending; use an external linear guide or a guided cylinder if lateral forces are present.
When replacing an existing cylinder, match five key points: 32 mm bore, 730 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. This SC model is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X730S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. The maximum push force at the 0.9 MPa operating limit is 724 N.
No, the maximum standard stroke for a 32 mm bore is 1000 mm, but 730 mm is not a standard catalog length and is considered a non-standard, made-to-order stroke. For long strokes like this, always guide the rod externally to prevent bending under side load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X730S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.