The AirTAC Airtac SC32 Standard Cylinder SC32X75 is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X75 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 75 mm stroke suits short linear movements in jigs, fixtures, and small automation cells. The 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable end-of-stroke deceleration.
This genuine AirTAC SC cylinder uses a PT1/8 port and M10x1.25 rod thread. The body length A is 140 mm, giving a total extended length of approximately 215 mm. It operates on filtered air from 0.15 to 1.0 MPa across a temperature range of -20 to +70 °C with standard TPU seals.
| Model | Airtac SC32 Standard Cylinder SC32X75 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Generates 402 N at 0.5 MPa for secure clamping of components in CNC fixtures and assembly jigs without deforming delicate parts.
The 75 mm stroke reliably actuates small diverter gates on compact packaging or sorting conveyors, handling rapid cycle rates with adjustable cushioning.
Ideal for test-tube handling and microplate positioning in laboratory automation, where its compact 140 mm body length fits tight instrument layouts.
Choose the SC32X75 for light-duty pushing, clamping, or ejecting where space is limited. If you need more force, stepping up to the SC40 bore provides 628 N at 0.5 MPa. For strokes of 300 mm or longer, evaluate side-load conditions and consider an external guide to protect the 12 mm rod from bending.
To replace an existing unit, match five points: 32 mm bore, 75 mm stroke, PT1/8 port thread, basic (no accessory) mounting, and confirm whether a magnet is required. This model has no built-in magnet.
Quick checklist
At 0.7 MPa operating pressure, the SC32X75 produces 563 N of push force on the piston. The maximum push force at 0.9 MPa is 724 N.
No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552. It directly replaces another AirTAC SC32 cylinder with the same stroke, port, and mounting configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.