The AirTAC Airtac SC32 Standard Cylinder SC32X750S is a genuine double-acting standard air cylinder with a Ø32mm bore and 750mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X750S is a double-acting single-rod cylinder delivering 402 N push and 345 N pull at 0.5 MPa, rising to 724 N at the 0.9 MPa maximum operating pressure. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable end-of-stroke deceleration for a 750 mm stroke.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The compact body length A of 140 mm plus the stroke yields an extended length of 890 mm, making it a genuine AirTAC solution for medium-reach applications.
| Model | Airtac SC32 Standard Cylinder SC32X750S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 750 mm stroke moves components between conveyor zones, with the built-in magnet enabling CMSG/DMSG sensors to confirm full extension and retraction for sequencing.
Operates a lightweight diverter gate in a packaging line, using the 402 N push force at 0.5 MPa and magnetic position feedback to ensure reliable sorting accuracy.
Provides consistent 724 N clamping force at 0.9 MPa in a material test rig, with the sensor confirming clamp closure before the test cycle begins.
The SC32X750S suits applications needing a 32 mm bore with sensor feedback. For higher force, step up to the SC40 bore providing 628 N push at 0.5 MPa. At a 750 mm stroke, ensure the 12 mm rod is not subjected to significant side loading; use an external linear guide or rod support to prevent bending. When replacing, match bore, stroke, PT1/8 port thread, the built-in magnet, and basic mounting.
Quick checklist
At the standard 0.5 MPa operating pressure, this cylinder provides 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix indicates a built-in magnet on the piston. This allows AirTAC CMSG, DMSG, or EMSG series sensors to be mounted on the tie-rod barrel for non-contact end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.