The AirTAC Airtac SC32 Standard Cylinder SC32X750SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 750mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X750SH is a double-acting pneumatic cylinder delivering 563 N of push force at 0.7 MPa, ideal for medium-speed actuation in hot environments. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration across the full 750 mm stroke.
Equipped with a built-in magnet (S suffix) and Viton seals (H suffix), this model operates reliably from 0 to 150 °C. The tie-rod construction keeps the body length A to 140 mm, making it a compact choice where space is tight but high-temperature performance is mandatory.
| Model | Airtac SC32 Standard Cylinder SC32X750SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals withstand 150 °C steam sterilization cycles, making this cylinder suitable for opening and closing small autoclave or sterilizer doors.
The 750 mm stroke reaches across a heated conveyor to apply adhesive. The built-in magnet allows sensor feedback for precise dispense timing.
Operates near hot molds to eject small castings. The 724 N max push force at 0.9 MPa handles light breakout forces in high-ambient-temperature areas.
Choose the SC32 bore for light clamping and sorting tasks; if you need more force, the SC40 delivers 879 N at 0.7 MPa. For this 750 mm stroke, ensure the rod is not subjected to side loading—use an external linear guide or a guided cylinder if lateral forces are present. When replacing, match the 32 mm bore, 750 mm stroke, PT port thread, built-in magnet, and Viton seal material exactly to guarantee fit and thermal compatibility.
Quick checklist
At 0.5 MPa, it provides 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
No. As a double-acting cylinder, the SC32X750SH will drift or drop if pressure is exhausted or the valve is centered. For load holding without live pressure, you must add a pilot-operated check valve or an external mechanical rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.