Airtac SC32 Standard Cylinder SC32X750TC
The AirTAC Airtac SC32 Standard Cylinder SC32X750TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 750mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke750 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X750TC
The AirTAC SC32X750TC is a double-acting tie-rod cylinder with a 32 mm bore and a 750 mm stroke, supplied with a centre trunnion (TC) mounting bracket for pivoting applications. At 0.5 MPa it produces 402 N of push force and 345 N of pull force, rising to 724 N at the maximum operating pressure of 0.9 MPa.
This model features a 12 mm diameter piston rod with an M10x1.25 knuckle thread and PT1/8 port connections. The body length (A) is 140 mm, giving a total extended length of approximately 890 mm. The adjustable air cushion (21 mm) decelerates the piston at stroke ends to reduce impact, and the standard TPU seals suit ambient temperatures from -20 to +70 °C.
Airtac SC32 Standard Cylinder SC32X750TC Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X750TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X750TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X750TC Is Used
Material Handling Gates
The 750 mm stroke and centre trunnion pivot suit diverters and gates on light-duty conveyors, where the 402 N push force at 0.5 MPa efficiently redirects small packages.
Component Transfer
Ideal for pick-and-place or linear transfer units in assembly cells. The compact 32 mm bore fits tight spaces, and the adjustable cushion smooths the 750 mm travel.
Ventilation Louvres
The pivoting TC mount allows the cylinder to actuate louvre banks or damper arms in agricultural ventilation systems, operating reliably on filtered compressed air.
Is the Airtac SC32 Standard Cylinder SC32X750TC the Right Cylinder?
For applications needing more force, the 40 mm bore SC series provides 628 N of push at 0.5 MPa. If space is a constraint, the 32 mm bore remains the most compact SC option. This 750 mm stroke is within the 1000 mm maximum standard stroke for bore 32.
To replace an existing cylinder, match five points: 32 mm bore, 750 mm stroke, PT port thread, centre trunnion (TC) mount with the F-SC32TC bracket, and no magnet. For strokes over 300 mm, be aware that the unsupported rod is susceptible to bending under side load; use an external linear guide or a guided cylinder if lateral forces are present.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X750TC FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder and its dimensions are shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC32 cylinder with the same bore, stroke, PT ports, and TC mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X750TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.