The AirTAC Airtac SC32 Standard Cylinder SC32X75FB is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X75FB is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa max operating pressure). With a 32 mm bore and 75 mm stroke, it suits short linear actuation tasks where space is limited.
This model is configured with an FB rear rectangular flange (F-SC32FB), bolting directly to a machine panel from the cap end. The 12 mm piston rod features an M10x1.25 thread, and the cylinder body length A measures 140 mm, giving a total extended length of approximately 215 mm.
| Model | Airtac SC32 Standard Cylinder SC32X75FB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa cleanly ejects lightweight plastic or metal parts from a fixture or die, with the 75 mm stroke providing a full, crisp release.
Operates a small diverter flap on a compact conveyor line. The rear flange mount (FB) allows secure attachment to the conveyor side frame.
Provides precise, repeatable 75 mm linear movement for test-tube handling or slide positioning in benchtop lab equipment, leveraging the smooth double-acting motion.
Choose the SC32 for light pneumatic tasks—its 402 N push at 0.5 MPa handles small clamping, sorting, or ejector duties. If your load exceeds this, step up to the SC40 which provides 628 N at the same pressure. For a 75 mm stroke, side-loading is rarely a concern, but always align the rod with the load axis.
To replace an existing unit, match five points: 32 mm bore, 75 mm stroke, PT1/8 ports, FB rear flange mount, and the absence of a magnet. This ensures a direct drop-in without re-drilling.
Quick checklist
At 0.7 MPa operating pressure, the 32 mm bore generates a theoretical push force of 563 N. The pull force on the retract stroke is 345 N at 0.5 MPa due to the 12 mm rod area.
This specific model code is for a rear flange (FB). For a front flange mount, you would order the SC32X75FA variant, which uses the F-SC32FA accessory. The mounting position is fixed by the suffix.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.