The AirTAC Airtac SC32 Standard Cylinder SC32X75SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X75SH is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. Its 75 mm stroke and 12 mm diameter piston rod are well-suited for light-duty clamping, sorting, and ejecting tasks where space is limited.
This variant is factory-equipped with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling reliable end-of-stroke detection without external brackets. The -H suffix specifies high-temperature Viton (FKM) seals, extending the operating range from the standard -20–70 °C up to 0–150 °C for use near ovens or in hot zones.
| Model | Airtac SC32 Standard Cylinder SC32X75SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With Viton seals rated to 150°C, this cylinder operates reliably in autoclave unloading, laminating presses, and other high-temperature industrial processes.
The built-in magnet allows CMSG/DMSG sensors to confirm full extension and retraction, making it ideal for automated part ejection in electronics or medical device assembly.
Delivering 402 N at 0.5 MPa, it provides ample force to actuate small diverter gates or stops on low-speed conveyor lines handling lightweight packages.
For applications needing slightly more force, stepping up to the 40 mm bore SC40 series provides 628 N at 0.5 MPa. If the 75 mm stroke is too short, the SC32 supports standard strokes up to 1000 mm. When replacing an existing cylinder, match all five key points: 32 mm bore, 75 mm stroke, PT1/8 port thread, the built-in magnet, and the high-temperature Viton seal material to ensure identical fit and thermal performance.
Quick checklist
At 0.7 MPa supply pressure, this 32 mm bore cylinder generates 563 N of push force and 345 N of pull force on the return stroke, based on the official AirTAC thrust table.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder, so the mounting dimensions are not interchangeable. It directly replaces another AirTAC SC32 cylinder with the same stroke, port, magnet, and seal options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.