The AirTAC Airtac SC32 Standard Cylinder SC32X75SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X75SLB is a 32 mm bore, 75 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
This model is factory-equipped with a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and includes LB axial foot mounts (F-SC32LB) for secure surface installation. The standard PT1/8 ports and M10x1.25 rod thread make it a direct, sensor-ready replacement for existing AirTAC SC32 setups.
| Model | Airtac SC32 Standard Cylinder SC32X75SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 75 mm stroke and 402 N push force at 0.5 MPa are ideal for ejecting small plastic or metal components from molds or fixtures, with the magnetic piston confirming full extension via a reed switch.
Use this cylinder to actuate a light-duty diverter gate on a packaging line. The LB foot mount provides a stable, fixed platform, while the sensor confirms gate position for interlock logic.
With its clean, tie-rod design and position sensing, the SC32X75SLB suits laboratory automation tasks like test-tube handling or reagent dispensing, where a compact 32 mm bore and precise end-of-stroke detection are required.
Choose the SC32X75SLB when your application requires a compact 32 mm bore with sensor feedback capability. If you need higher force, step up to the SC40 series which provides 628 N of push force at 0.5 MPa. For strokes significantly longer than 75 mm, ensure the load is guided externally, as the 12 mm rod is not designed to support high side loads.
For a correct replacement, match five key points: 32 mm bore, 75 mm stroke, PT1/8 port thread, LB foot mounting with the F-SC32LB bracket, and the -S magnet for sensor compatibility. This ensures the physical fit, force output, and control interface match your current machine design.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N. At 0.7 MPa, it increases to 563 N, and it reaches a maximum of 724 N at the 0.9 MPa operating limit. The theoretical force at 1.0 MPa is 82 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG series reed or solid-state sensors directly onto the barrel to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.